SS Water Filter Housing Stainless Steel Housing For Water Treatment
there are 7 filter cartrdiges put into this ss filter housing ,if
you have requirements ,we can also OEM and ODM.
Stainless Steel Cartridge Filter Housing Parameters:
1. Inlet/outlet:2"(DN50) and the flow rate is 10000L/H,wall
thickness is 1.5mm with 304 material
2. this fitler housing usually use pp melt blown filter cartridge
with 1um ,5um,10um,etc and pp pleated filter cartridge double open
end with 0.1um,0.22um.0.45um etc.not suitable for activated carbon
filter cartridge(including CTO and UDF filter cartridge),please
3.Material: Made up of stainless steel 304 or 316.
4. Humanized structure design , easy to operate and maintain.
5. Filtration precision: 0.1μm--100μm
6. Interface type: clamp, standard flange
7. Design pressure: 0.75—1.6Mpa
8. Seal type: O-ring and flat pad
9. Surface Treatment: honed, polishing, electrolytic polishing.
10.high flow rate and long service life
11. Application: Electroplating, Medical, Waste water treatment,
|Material||304ss or 316L|
|Design temperature||5 ℃ -100 ℃|
|Pressure of equipment||0.6-1.6MPA|
|Operating temperature||5 ~ 40 ℃|
|Seal type||O-ring or flat washer|
Stainless Steel Filter Housing Shows Details: